What igniter fits my Goodman furnace?

The correct replacement for Goodman model GUS075-3 Furnace — B1401018S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GUS075-3 Furnace — B1401018S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for GUS075-3 Furnace — B1401018S

Name: OEM Goodman Hot Surface Ignitor for GUS075-3 Furnace — B1401018S
Brand: Goodman
SKU: GOODMAN-13343
Price: 44.95 USD
Availability: InStock

SKU: GOODMAN-13343 Brand: Goodman

$44.95 $58.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman B1401018S Hot Surface Ignitor

The B1401018S is a genuine OEM Goodman hot surface ignitor (HSI), a direct-fit replacement for the GUS075-3 gas furnace. This silicon-carbide element glows red-hot to light the main burners on each heating cycle. A cracked or aged ignitor is the single most common cause of intermittent no-heat — the furnace clicks and the inducer runs, but the burners never light.

Specifications

Type: Silicon carbide hot surface ignitor
Voltage: 120V
Function: Direct burner ignition (no pilot)
Fits: Goodman GUS075-3 furnace
OEM Part Number: B1401018S
Includes: Ignitor with mounting bracket and lead harness/connector

OEM vs. Generic

The OEM Goodman HSI comes with the correct bracket and plug so it drops straight in with no wiring modifications. Universal silicon-nitride ignitors can last longer but require adapting the connector and bracket. For a plug-and-play repair matched to the GUS075-3, OEM is the fastest, most reliable path.

Installation Difficulty: Easy to Moderate

Typically one mounting screw and a single plug-in connector — about 20 minutes. Never touch the silicon-carbide element with bare fingers; skin oils shorten its life. Always disconnect power before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$44.95

Frequently Asked Questions

Does this Igniter fit my Goodman GUS075-3 Furnace — B1401018S?

Yes. This is the factory-specified OEM igniter for the Goodman GUS075-3 Furnace — B1401018S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman GUS075-3 Furnace — B1401018S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu