What igniter fits my Goodman furnace?

The correct replacement for Goodman model GSM080-4 Furnace — B1401018S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GSM080-4 Furnace — B1401018S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for GSM080-4 Furnace — B1401018S

Name: OEM Goodman Hot Surface Ignitor for GSM080-4 Furnace — B1401018S
Brand: Goodman
SKU: GOODMAN-12939
Price: 44.95 USD
Availability: InStock

SKU: GOODMAN-12939 Brand: Goodman

$44.95 $57.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine Goodman B1401018S Hot Surface Ignitor is the factory ignition element for the GSM080-4 gas furnace and compatible GMS/GSM 80 series models. When the thermostat calls for heat and the pressure switch proves draft, the control board energizes this ignitor; it glows white-hot to ignite the burner gas. A failed or cracked ignitor is the single most common cause of a no-heat / no-ignition furnace call.

Specifications

Type: Hot Surface Ignitor (HSI), silicon nitride element
Voltage: 120V AC
Durable, warp-resistant design with factory mounting bracket
Includes wire leads and connector
OEM Part Number: B1401018S
Fits: Goodman GSM080-4 and related 80,000 BTU furnaces

OEM vs. Generic

The OEM B1401018S silicon-nitride ignitor is more rugged and longer-lived than legacy silicon-carbide styles and drops in with the exact bracket, lead length, and connector Goodman specified. Universal HSI kits require adapting the mount and splicing wires, and their glow characteristics may not match the board's timing — risking short cycling or premature failure. The OEM part restores factory ignition performance directly.

Installation Difficulty

Easy (2 of 5). Shut off power, unplug the ignitor connector, remove the single mounting screw, and slide out the old element — handle the new ignitor only by its ceramic base, never the fragile glow tip. Fit the new one, secure the screw, and reconnect. About a 15-minute repair for most homeowners.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$44.95

Frequently Asked Questions

Does this Igniter fit my Goodman GSM080-4 Furnace — B1401018S?

Yes. This is the factory-specified OEM igniter for the Goodman GSM080-4 Furnace — B1401018S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman GSM080-4 Furnace — B1401018S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu