What igniter fits my Goodman furnace?

The correct replacement for Goodman model GMT090-5A — B1401018S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMT090-5A — B1401018S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for GMT090-5A — B1401018S

Name: OEM Goodman Hot Surface Ignitor for GMT090-5A — B1401018S
Brand: Goodman
SKU: GOODMAN-12410
Price: 44.95 USD
Availability: InStock

SKU: GOODMAN-12410 Brand: Goodman

$44.95 $59.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman B1401018S Hot Surface Ignitor is a genuine OEM ignition component engineered for GMT090-5A gas furnaces. When your furnace clicks but the burners fail to light, a cracked or worn ignitor is the most common culprit. This factory-spec part restores reliable, consistent ignition on every heating cycle.

Specifications

OEM Part Number: B1401018S
Compatible Model: Goodman GMT090-5A
Ignitor Type: Silicon carbide hot surface
Equipment: Gas furnace
Voltage: 120V
Includes mounting bracket and wire harness

OEM vs. Generic

Our genuine OEM B1401018S is built to Goodman's exact resistance and heat-up specifications, ensuring proper flame-sensing timing and long service life. Generic universal ignitors may fit physically but often mismatch the control board's timing sequence, leading to lockouts and premature failure. For a furnace you depend on through winter, OEM is the safe choice.

Installation Difficulty

Rating: Easy (1/5). Replacement typically takes 15–20 minutes with a single screwdriver. Always disconnect power at the breaker before servicing. Handle the ignitor by its ceramic base only — skin oils can create hot spots that shorten its life. Professional installation is recommended if you are not comfortable working around gas appliances.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$44.95

Frequently Asked Questions

Does this Igniter fit my Goodman GMT090-5A — B1401018S?

Yes. This is the factory-specified OEM igniter for the Goodman GMT090-5A — B1401018S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman GMT090-5A — B1401018S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu