What igniter fits my Goodman furnace?

The correct replacement for Goodman model GMNT060-3 — B1401012 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMNT060-3 — B1401012.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for GMNT060-3 — B1401012

Name: OEM Goodman Hot Surface Ignitor for GMNT060-3 — B1401012
Brand: Goodman
SKU: GOODMAN-11633
Price: 22.95 USD
Availability: InStock

SKU: GOODMAN-11633 Brand: Goodman

$22.95 $29.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman B1401012 Hot Surface Ignitor

The Goodman B1401012 is a genuine OEM hot surface ignitor designed for the GMNT060-3 furnace and compatible Goodman/Amana models. The ignitor glows red-hot on a call for heat to light the burners. Because it is the most frequently replaced ignition component, a cracked, worn, or no-glow ignitor is the leading cause of "no heat" and ignition-lockout complaints.

Specifications

Type: Hot surface ignitor (HSI)
Element: Silicon carbide
Nominal supply: 120 VAC
Includes: Ignitor with mounting bracket and lead/connector
OEM Part Number: B1401012
Fits: Goodman GMNT060-3 and compatible models

OEM vs. Generic

The OEM Goodman B1401012 arrives with the correct bracket, gasket, and plug so it seats at the proper depth over the burner—critical for reliable light-off. Universal ignitor kits require re-terminating the connector and bending the bracket, which risks positioning errors. OEM is the drop-in choice for a certain, one-time fix.

Installation Difficulty: Easy

Cut power to the furnace. Remove the single mounting screw, unplug the old ignitor at the harness, and lift it out. Handle the new ignitor only by its ceramic base—skin oils cause hot spots and premature failure. Seat the new unit, secure the screw, reconnect the plug, and cycle the furnace to confirm a clean glow and burner light.

Confirm the connector style and model number before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$22.95

Frequently Asked Questions

Does this Igniter fit my Goodman GMNT060-3 — B1401012?

Yes. This is the factory-specified OEM igniter for the Goodman GMNT060-3 — B1401012. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman GMNT060-3 — B1401012?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu