What igniter fits my Goodman furnace?

The correct replacement for Goodman model DMP125-52AB — B1401014 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number DMP125-52AB — B1401014.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for DMP125-52AB — B1401014

Name: OEM Goodman Hot Surface Ignitor for DMP125-52AB — B1401014
Brand: Goodman
SKU: GOODMAN-9538
Price: 22.95 USD
Availability: InStock

SKU: GOODMAN-9538 Brand: Goodman

$22.95 $29.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman B1401014 Hot Surface Ignitor

The B1401014 is a genuine OEM Goodman hot surface ignitor (HSI) for the DMP125-52AB gas furnace and compatible Goodman/Amana/Janitrol models. When the ignition control calls for heat, this element electrically heats to a glowing temperature to ignite the gas at the burners. A failed ignitor is the single most common cause of a furnace that clicks and tries to start but produces no heat, or that locks out after several ignition attempts.

Specifications

Type: Hot surface ignitor (HSI)
Element: Silicon carbide / silicon nitride igniter
Voltage: 120VAC
Includes: Ignitor with mounting bracket and lead/connector
Fits: Goodman DMP125-52AB and related DMP-series furnaces

OEM vs. Generic

OEM ignitors match the factory resistance, connector, and bracket geometry so the element sits at the correct position over the burner for reliable light-off. Universal/generic ignitors require splicing and manual positioning and can crack or draw the wrong current, causing repeat failures. The genuine part restores factory ignition performance.

Install Difficulty

Moderate (2/5). Typically a 15–25 minute job: disconnect the ignitor lead, remove one or two mounting screws, and install the new element. Handle the ceramic element only by the bracket — skin oils and finger contact create hot spots that shorten its life. Cut power at the breaker before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$22.95

Frequently Asked Questions

Does this Igniter fit my Goodman DMP125-52AB — B1401014?

Yes. This is the factory-specified OEM igniter for the Goodman DMP125-52AB — B1401014. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman DMP125-52AB — B1401014?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu