What igniter fits my Goodman furnace?

The correct replacement for Goodman model AMH81405DNAA Furnace — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH81405DNAA Furnace — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this ignitor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for AMH81405DNAA Furnace — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for AMH81405DNAA Furnace — 0130F00008S
Brand: Goodman
SKU: GOODMAN-6122
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-6122 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00008S hot surface ignitor is a genuine OEM igniter for AMH81405DNAA gas furnaces. It glows red-hot on each call for heat to ignite the burners. A no-heat furnace that clicks but never lights is the classic symptom of a cracked or worn-out ignitor — one of the most common furnace failures.

Type: Hot surface ignitor (HSI)
Element: Durable silicon-nitride style
Voltage: 120V
Connector: OEM 2-pin plug
OEM Part #: 0130F00008S
Fits: AMH81405DNAA and compatible Goodman/Amana furnaces

OEM vs. Generic: Universal ignitors require adapters, bracket bending, and hoping the mounting geometry is close enough. The OEM 0130F00008S drops into the factory bracket with the correct plug — no splicing. Its silicon-nitride element resists thermal shock and typically outlasts brittle silicon-carbide aftermarket units.

Install difficulty: Easy (2/5). Cut power at the breaker, unplug the old ignitor, unscrew the mounting bracket, and install the new unit. Handle the fragile element by the ceramic base only — never touch the hot surface with bare fingers. About 15 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$76.95

Frequently Asked Questions

Does this Ignitor fit my Goodman AMH81405DNAA Furnace — 0130F00008S?

Yes. This is the factory-specified OEM ignitor for the Goodman AMH81405DNAA Furnace — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the ignitor on my Goodman AMH81405DNAA Furnace — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this ignitor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman ignitor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu

OEM Goodman Hot Surface Ignitor for AMH81405DNAA Furnace — 0130F00008S

Shipping Information

Return Policy

Frequently Asked Questions