What igniter fits my Goodman furnace?

The correct replacement for Goodman model AMH80905CNAB — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80905CNAB — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for AMH80905CNAB — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for AMH80905CNAB — 0130F00008S
Brand: Goodman
SKU: GOODMAN-5855
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-5855 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00008S Hot Surface Ignitor is a genuine OEM ignition component engineered for the Goodman/Amana AMH80905CNAB gas furnace and compatible 80% AFUE models. When your furnace clicks but won't light, a cracked or worn ignitor is the most common culprit — this durable silicon nitride element restores reliable, first-try ignition every heating cycle.

Specifications

OEM Part Number: 0130F00008S
Part Type: Hot Surface Ignitor (HSI)
Element Material: Silicon nitride (high durability, resists cracking)
Fits: AMH80905CNAB and compatible Goodman/Amana furnaces
Voltage: 120V hot surface ignition
Equipment: Gas Furnace

OEM vs. Generic

This is the factory OEM ignitor — built to Goodman's exact mounting bracket, connector, and heat-up specifications for guaranteed fit and long service life. Universal/generic ignitors often require adapter kits and rewiring, and typically fail sooner under repeated thermal cycling. Choose OEM for the longest-lasting, warranty-safe repair.

Installation Difficulty

Easy (2/5) — Cut power at the furnace switch, unplug the ignitor connector, remove the mounting screw, and swap. Handle the fragile element by the ceramic base only. Most homeowners complete this in 15–20 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman AMH80905CNAB — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman AMH80905CNAB — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman AMH80905CNAB — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu