What igniter fits my Goodman furnace?

The correct replacement for Goodman model AMH80904BNAC — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80904BNAC — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for AMH80904BNAC — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for AMH80904BNAC — 0130F00008S
Brand: Goodman
SKU: GOODMAN-5790
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-5790 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00008S Hot Surface Ignitor

The 0130F00008S is a genuine OEM hot surface ignitor engineered for the Goodman/Amana AMH80904BNAC 80% AFUE gas furnace and compatible platform models. When your furnace clicks but fails to light, or the burners short-cycle on ignition lockout, a cracked or worn ignitor is the most common culprit. This silicon nitride element delivers reliable, high-temperature ignition cycle after cycle.

Specifications

OEM Part Number: 0130F00008S
Element type: Silicon nitride hot surface ignitor
Voltage: 120V
Compatible model: AMH80904BNAC and related Goodman/Amana 80% furnaces
Includes mounting bracket and connector

OEM vs. Generic

This is the factory OEM component, not an aftermarket universal ignitor. OEM ensures exact fit, correct resistance, and full compatibility with the furnace control board — universal parts often require splicing and can trip false lockouts. OEM is the safe choice for warranty-sensitive repairs.

Installation Difficulty

Easy (2/5). Cut power at the disconnect, remove the burner compartment door, unplug the connector, remove two screws, and swap. A typical repair takes 15–20 minutes. Handle the fragile element by the ceramic base only — never touch the silicon nitride tip.

Backed by fast shipping and expert HVAC support from National HVAC Parts.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman AMH80904BNAC — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman AMH80904BNAC — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman AMH80904BNAC — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu