What igniter fits my Goodman furnace?

The correct replacement for Goodman model AMH80604BXAA — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80604BXAA — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for AMH80604BXAA — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for AMH80604BXAA — 0130F00008S
Brand: Goodman
SKU: GOODMAN-5215
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-5215 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00008S Hot Surface Ignitor is a genuine OEM replacement component engineered for the Goodman/Amana AMH80604BXAA gas furnace and compatible 80% AFUE models. When your furnace fails to light, produces no heat, or cycles on limit, a cracked or worn ignitor is the most common culprit. This durable silicon-nitride element delivers reliable, repeatable ignition across thousands of heating cycles.

Specifications

Part Number: 0130F00008S
Type: Silicon nitride hot surface ignitor
Fits Model: AMH80604BXAA (and compatible Goodman/Amana furnaces)
Equipment: Gas furnace ignition system
Material: High-temperature ceramic/silicon nitride

OEM vs. Generic

This is a genuine OEM Goodman part built to the exact resistance and thermal tolerances of your furnace's control board. Generic ignitors often draw incorrect amperage, shortening board life and voiding warranties. The OEM 0130F00008S guarantees proper fit and safe operation.

Installation Difficulty

Easy (DIY-friendly) — Typically a single-connector, two-screw swap taking 15–20 minutes. Always disconnect power and shut off gas before servicing. Handle the ignitor element by its bracket only; skin oils cause premature failure.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman AMH80604BXAA — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman AMH80604BXAA — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman AMH80604BXAA — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu