What igniter fits my Goodman furnace?

The correct replacement for Goodman model AMH80604BNAA — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80604BNAA — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for AMH80604BNAA — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for AMH80604BNAA — 0130F00008S
Brand: Goodman
SKU: GOODMAN-5172
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-5172 Brand: Goodman

$76.95 $99.99

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00008S Hot Surface Ignitor (HSI) is the genuine OEM ignition source for the AMH80604BNAA gas furnace and compatible Goodman and Amana models. On a call for heat, the control board energizes this igniter until it glows red-hot, lighting the burners. A cracked or worn igniter is the single most common cause of a furnace that clicks and blows cold air or locks out on ignition failure.

Type: Hot surface ignitor (HSI)
Voltage: 120V line-voltage igniter
Element: Durable silicon-nitride style for long service life
Fits: AMH80604BNAA and compatible Goodman/Amana furnaces
Includes: Igniter with mounting bracket and lead — direct plug-in replacement
Condition: New, genuine OEM part

OEM vs. Generic: The genuine OEM igniter matches the exact resistance, gas-flame proximity, and connector Goodman designed for this furnace, ensuring reliable light-off and full warranty compatibility. Universal generics require adapters and often run hotter or cooler than spec, shortening life and causing intermittent no-heat calls.

Installation difficulty: Easy. About 15 minutes. Kill power at the furnace switch, unplug the igniter connector, remove one or two screws, and swap in the new unit — handle the ceramic element by the bracket only; skin oils cause premature failure. No tools beyond a nut driver. Restore power and confirm a clean ignition sequence.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman AMH80604BNAA — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman AMH80604BNAA — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman AMH80604BNAA — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu

OEM Goodman Hot Surface Ignitor for AMH80604BNAA — 0130F00008S

Shipping Information

Return Policy

Frequently Asked Questions