What igniter fits my Goodman furnace?

The correct replacement for Goodman model AMH80453ANAA Furnace — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80453ANAA Furnace — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for AMH80453ANAA Furnace — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for AMH80453ANAA Furnace — 0130F00008S
Brand: Goodman
SKU: GOODMAN-4997
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-4997 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00008S is a genuine OEM hot surface ignitor (HSI) for the AMH80453ANAA gas furnace and compatible Goodman/Amana models. The HSI glows red-hot on each call for heat to ignite the burners. A cracked, aged, or carbon-fouled ignitor is the most common cause of no-heat, delayed ignition, and repeated lockout faults. This factory ignitor kit installs quickly and restores dependable, on-demand ignition.

Part Number: 0130F00008S
Type: Hot surface ignitor (silicon-based element)
Voltage: 120V AC (verify against unit rating plate)
Fits: Goodman/Amana AMH80453ANAA and related furnaces
Includes: Ignitor with mounting bracket and lead/connector
Handling: Do not touch the element — skin oils shorten life

OEM vs. Generic

The OEM Goodman 0130F00008S ships with the correct bracket, connector, and lead length for a plug-and-play swap. Universal ignitors require adapting the mount and wiring and can vary in warm-up time. For fastest, most reliable installation, OEM is preferred.

Installation

Difficulty: Easy to Moderate. Remove the burner door, unplug the old ignitor, unscrew the bracket, and reverse. Cut power first and handle the new element only by the ceramic base. Test for a normal ignition sequence after install.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman AMH80453ANAA Furnace — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman AMH80453ANAA Furnace — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman AMH80453ANAA Furnace — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu