What igniter fits my Goodman furnace?

The correct replacement for Goodman model AMH80403AXAA — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80403AXAA — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this ignitor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for AMH80403AXAA — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for AMH80403AXAA — 0130F00008S
Brand: Goodman
SKU: GOODMAN-4957
Price: 89.95 USD
Availability: InStock

SKU: GOODMAN-4957 Brand: Goodman

$89.95 $119.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00008S Hot Surface Ignitor

The Goodman 0130F00008S is a factory hot surface ignitor (HSI) built for the AMH80403AXAA gas furnace and compatible Goodman/Amana models. The ignitor glows red-hot on a call for heat to light the main burners — the single most common failure point in modern furnaces. If your furnace clicks but won't fire, or the flame won't establish, a cracked or aged ignitor is the usual cause. This OEM assembly includes the ignitor element, bracket, and wiring harness for a plug-and-play swap.

Specifications

Type: Hot surface ignitor (silicon nitride style element)
Voltage: 120 VAC
Includes: Element, mounting bracket, and connector harness
Fit: Direct OEM replacement for AMH80403AXAA
OEM Part No.: 0130F00008S

OEM vs. Generic

The OEM 0130F00008S ships with the correct bracket, gasket, and pre-terminated harness, so it drops in without adapters. Universal ignitors require splicing and may not seat at the proper burner-face distance, shortening life. For reliable ignition and warranty coverage, choose genuine OEM.

Install Difficulty

Easy (15–20 min). Power off the furnace, unplug the old harness, remove one or two screws, and install the new unit — never touch the ceramic element with bare fingers. A confident DIYer or any HVAC tech can complete this.

Fits: AMH80403AXAA. Verify your model before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$89.95

Frequently Asked Questions

Does this Ignitor fit my Goodman AMH80403AXAA — 0130F00008S?

Yes. This is the factory-specified OEM ignitor for the Goodman AMH80403AXAA — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the ignitor on my Goodman AMH80403AXAA — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this ignitor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman ignitor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu