What igniter fits my Goodman furnace?

The correct replacement for Goodman model ADV81155CXBB — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ADV81155CXBB — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for ADV81155CXBB — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for ADV81155CXBB — 0130F00008S
Brand: Goodman
SKU: GOODMAN-3489
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-3489 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00008S Hot Surface Ignitor

The 0130F00008S is the genuine OEM hot surface ignitor (HSI) for Goodman ADV81155CXBB gas furnaces. On each call for heat, the control board energizes the ignitor, which glows red-hot to light the in-shot burners. HSIs are the single most common furnace failure — the brittle element cracks with age and thermal cycling. Symptoms include no heat, a furnace that clicks but never lights, and a cracked or dark ignitor tip.

Specifications

Type: Hot surface ignitor (HSI)
Voltage: 120V AC ignition circuit
Primary fit: Goodman ADV81155CXBB furnace
Handling: Do not touch the element — skin oils cause premature failure
OEM Part Number: 0130F00008S

OEM vs. Generic

The genuine Goodman OEM ignitor matches the exact resistance, glow temperature, and bracket geometry the ADV control board expects, giving reliable light-off and full service life. Universal silicon-nitride replacements can vary in warm-up time and mounting fit, leading to delayed ignition and repeat failures. For a no-heat callback, OEM is worth it.

Installation Difficulty

Easy (2/5) — Cut power, remove one or two mounting screws, unplug the ceramic connector, and seat the new ignitor without touching the element. Most complete it in 15–20 minutes; verify a strong glow and clean burner light-off afterward.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman ADV81155CXBB — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman ADV81155CXBB — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman ADV81155CXBB — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu