What igniter fits my Goodman furnace?

The correct replacement for Goodman model ADV80905CXBA — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ADV80905CXBA — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for ADV80905CXBA — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for ADV80905CXBA — 0130F00008S
Brand: Goodman
SKU: GOODMAN-3447
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-3447 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00008S Hot Surface Ignitor is a genuine OEM igniter designed for the ADV80905CXBA gas furnace. The hot surface ignitor (HSI) heats to a glowing temperature to light the burners at each heat call. A cracked, worn, or aged igniter is one of the most common causes of no-heat furnace failures — replacing it restores dependable startup.

Specifications

Part type: Hot surface ignitor (HSI)
OEM part number: 0130F00008S
Fits: Goodman ADV80905CXBA and compatible furnace models
Element: Durable silicon-nitride style igniter
Includes mounting bracket and wiring connector
Application: Furnace burner ignition

OEM vs. Generic

Genuine Goodman igniters match the exact resistance, warm-up time, and bracket geometry the control board expects, ensuring proper ignition sequencing. Generic silicon-carbide igniters are more fragile and can vary in timing, leading to lockouts. OEM is strongly recommended for reliable, long-lasting ignition.

Installation Difficulty

Moderate (2 of 5). Typically one or two screws plus an electrical connector. Shut off power before servicing and never touch the igniter element with bare fingers — skin oils cause premature failure. Handle by the ceramic base only.

Restore fast, reliable heat to your ADV80905CXBA furnace with a genuine OEM hot surface ignitor.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman ADV80905CXBA — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman ADV80905CXBA — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman ADV80905CXBA — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu