What igniter fits my Goodman furnace?

The correct replacement for Goodman model ACV90905DXBA Furnace — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACV90905DXBA Furnace — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for ACV90905DXBA Furnace — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for ACV90905DXBA Furnace — 0130F00008S
Brand: Goodman
SKU: GOODMAN-2472
Price: 92.34 USD
Availability: InStock

SKU: GOODMAN-2472 Brand: Goodman

$92.34 $124.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00008S Hot Surface Ignitor

The Goodman 0130F00008S is a genuine OEM hot surface ignitor (HSI) for the ACV90905DXBA high-efficiency gas furnace. The ignitor heats to over 2,000°F to light the burners on each heating call, and it is the single most common no-heat failure point in modern furnaces. A cracked or worn ignitor will glow weakly or not at all, leaving the furnace stuck in a failed-ignition lockout. Replacing it with the correct factory part restores fast, dependable ignition.

Specifications

Type: Hot Surface Ignitor (HSI)
Operating temperature: ~2,000°F+ glow temperature
Application: Furnace burner ignition
Compatible model: Goodman ACV90905DXBA (verify against your unit's parts list)
OEM Part Number: 0130F00008S
Includes: Ignitor with factory mounting bracket and wire harness

OEM vs. Generic

The genuine OEM Goodman ignitor arrives with the correct bracket, connector, and element type so it drops in with no adapters or rewiring. Generic universal ignitor kits require splicing, bracket fabrication, and connector swaps — a poor mechanical fit stresses the brittle element and shortens its life. For the most reliable, longest-lasting ignition, install the OEM part.

Installation Difficulty

Moderate (2/5) — Shut off power and gas at the furnace. Remove the burner-compartment door, unplug the ignitor harness, remove the mounting screw, and install the new ignitor. Handle by the ceramic base only — never touch the glow element, as skin oils cause early failure. About 20–30 minutes for a competent DIYer.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$92.34

Frequently Asked Questions

Does this Igniter fit my Goodman ACV90905DXBA Furnace — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman ACV90905DXBA Furnace — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman ACV90905DXBA Furnace — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu