What igniter fits my Goodman furnace?

The correct replacement for Goodman model GMP050-3 Furnace — B1401012 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMP050-3 Furnace — B1401012.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Igniter for GMP050-3 Furnace — B1401012

Name: OEM Goodman Hot Surface Igniter for GMP050-3 Furnace — B1401012
Brand: Goodman
SKU: GOODMAN-11832
Price: 22.95 USD
Availability: InStock

SKU: GOODMAN-11832 Brand: Goodman

$22.95 $29.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman B1401012 Hot Surface Igniter is a genuine OEM ignition component for the Goodman GMP050-3 gas furnace. The hot surface igniter (HSI) glows red-hot on a call for heat to light the burners, making it one of the most frequently replaced wear parts in any gas furnace. A cracked, worn, or open igniter is the #1 cause of a furnace that clicks but won't fire — replacing it typically restores heat immediately.

Specifications

Part type: Hot Surface Igniter (HSI)
Compatible model: Goodman GMP050-3 gas furnace
OEM part number: B1401012
Function: burner ignition on call for heat
Fitment: direct-fit factory replacement with mounting bracket

OEM vs. Generic

The genuine Goodman igniter is matched to the furnace's ignition timing and voltage profile, delivering consistent light-off and long service life. Universal generic igniters may need bracket adapters and can be more fragile, risking repeat failures mid-season. For reliable winter heat, OEM is the smart buy.

Installation Difficulty

Easy. Shut off power and gas, unplug the igniter connector, remove one or two mounting screws, and install the replacement — handling only by the ceramic base, never the fragile element. Most homeowners can complete this in under 20 minutes; when in doubt, call a technician.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Igniter ...

$22.95

Frequently Asked Questions

Does this Igniter fit my Goodman GMP050-3 Furnace — B1401012?

Yes. This is the factory-specified OEM igniter for the Goodman GMP050-3 Furnace — B1401012. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman GMP050-3 Furnace — B1401012?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu