What igniter fits my Goodman furnace?

The correct replacement for Goodman model GMNT080-4 Furnace — B1401012 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMNT080-4 Furnace — B1401012.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Igniter for GMNT080-4 Furnace — B1401012

Name: OEM Goodman Hot Surface Igniter for GMNT080-4 Furnace — B1401012
Brand: Goodman
SKU: GOODMAN-11676
Price: 22.95 USD
Availability: InStock

SKU: GOODMAN-11676 Brand: Goodman

$22.95 $29.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman B1401012 Hot Surface Igniter is a genuine OEM ignition component for GMNT080-4 gas furnaces and compatible Goodman/Amana equipment. The igniter glows red-hot on a call for heat to light the main burners. A weak, cracked, or burned-out igniter is the single most common cause of no-heat furnace failures — replacing it restores reliable, on-demand ignition.

Specifications

Type: Hot surface igniter (burner ignitor)
Fits: Goodman GMNT080-4 and select Goodman/Amana furnaces
Function: Direct-spark burner ignition on heat call
OEM Part Number: B1401012
Brand: Goodman (OEM)

OEM vs. Generic

OEM igniters use the correct element resistance and mounting bracket so timing and gap match the furnace control sequence exactly. Generic silicon-nitride replacements may fit but can alter warm-up timing and are more fragile. The OEM B1401012 drops in without adapters.

Install Difficulty

Easy (2/5) — Turn off gas and power, remove the burner-compartment door, unplug the igniter connector, remove one or two mounting screws, and install the new igniter. Never touch the igniter element with bare fingers — skin oils shorten its life. About 15–20 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Igniter ...

$22.95

Frequently Asked Questions

Does this Igniter fit my Goodman GMNT080-4 Furnace — B1401012?

Yes. This is the factory-specified OEM igniter for the Goodman GMNT080-4 Furnace — B1401012. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman GMNT080-4 Furnace — B1401012?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu