What igniter fits my Goodman furnace?

The correct replacement for Goodman model GMN080-4 — B1401012 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMN080-4 — B1401012.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Igniter for GMN080-4 — B1401012

Name: OEM Goodman Hot Surface Igniter for GMN080-4 — B1401012
Brand: Goodman
SKU: GOODMAN-11568
Price: 22.95 USD
Availability: InStock

SKU: GOODMAN-11568 Brand: Goodman

$22.95 $29.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman B1401012 Burner Ignitor (Hot Surface)

The Goodman B1401012 is a genuine OEM hot surface burner ignitor for the GMN080-4 gas furnace. On each call for heat, the control board energizes the ignitor until it glows red-hot, lighting the burners before the gas valve opens. Because the element is fragile and cycles thousands of times a season, the ignitor is the single most common furnace failure — symptoms include no heat, the blower running with cold air, or a visibly cracked/broken element. This is an inexpensive, high-impact repair that gets heat back fast.

Specifications

Part number: B1401012
Type: Hot surface igniter (HSI)
Application: Gas burner ignition
Fits: Goodman GMN080-4 furnace
Equipment: Gas furnace
Type: Direct OEM replacement with correct mount & connector

OEM vs. Generic

The OEM B1401012 matches the original element resistance, bracket, and plug so it installs in minutes and reliably ignites the burners. A generic universal ignitor may require adapter brackets and wire splicing, and off-spec elements can be slow to reach temperature or fail prematurely. Given the low price, OEM is the smart, durable choice.

Installation Difficulty

Easy (2/5). Typically 15–20 minutes: cut power, unplug the connector, remove one or two screws, and swap. Never touch the ceramic/silicon element with bare fingers — skin oils cause hot spots and early failure. Handle by the base/bracket only.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Igniter ...

$22.95

Frequently Asked Questions

Does this Igniter fit my Goodman GMN080-4 — B1401012?

Yes. This is the factory-specified OEM igniter for the Goodman GMN080-4 — B1401012. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman GMN080-4 — B1401012?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu