What igniter fits my Goodman furnace?

The correct replacement for Goodman model GDS80703AXA — B1401012 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GDS80703AXA — B1401012.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Igniter for GDS80703AXA — B1401012

Name: OEM Goodman Hot Surface Igniter for GDS80703AXA — B1401012
Brand: Goodman
SKU: GOODMAN-10317
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-10317 Brand: Goodman

$34.95 $46.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman B1401012 is a genuine OEM hot surface igniter for the GDS80703AXA gas furnace and compatible Goodman/Amana models. This component glows to the temperature required to ignite the burner gas at each heating cycle. A failed igniter is the most common cause of a furnace that runs the inducer and blower but never lights.

Specifications

Type: Hot surface igniter (HSI)
Element: Silicon nitride / carbide (per factory spec)
Voltage: 120V
Connector: Factory 2-pin plug
Application: Gas furnace burner ignition

OEM vs. Generic

The OEM Goodman igniter matches the exact resistance, mounting bracket, and plug orientation of the original, ensuring correct glow temperature and a plug-and-play fit. Universal igniters require an adapter harness and manual bracket alignment, and the fragile element can crack if positioned incorrectly. OEM gives the most reliable ignition.

Installation Difficulty

Moderate — One mounting screw and a single plug connector, but the ceramic element is brittle — never touch the glow surface with bare fingers. Shut off power and gas. About 15–20 minutes; straightforward for a confident DIYer.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Igniter ...

$34.95

Frequently Asked Questions

Does this Igniter fit my Goodman GDS80703AXA — B1401012?

Yes. This is the factory-specified OEM igniter for the Goodman GDS80703AXA — B1401012. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman GDS80703AXA — B1401012?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu