What igniter fits my Goodman furnace?

The correct replacement for Goodman model DMP150-52AB — B1401014 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number DMP150-52AB — B1401014.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Igniter for DMP150-52AB — B1401014

Name: OEM Goodman Hot Surface Igniter for DMP150-52AB — B1401014
Brand: Goodman
SKU: GOODMAN-9560
Price: 22.95 USD
Availability: InStock

SKU: GOODMAN-9560 Brand: Goodman

$22.95 $29.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman B1401014 Hot Surface Igniter

The Goodman B1401014 is a genuine OEM hot surface igniter engineered for the Goodman/Amana DMP150-52AB gas furnace. When your furnace clicks but the burners never light, a cracked or worn igniter is the most common culprit. This factory-spec component restores dependable, on-demand ignition each heating cycle.

Specifications

Part Number: B1401014
Type: Hot Surface Igniter (silicon carbide element)
Fits: Goodman/Amana DMP150-52AB furnaces
Voltage: 120V compatible
Equipment: Gas Furnace
Brand: Goodman (OEM)

OEM vs. Generic

Generic igniters are widely available, but their element density and mounting geometry often vary, leading to cold-solder cracks and premature failure. This OEM Goodman B1401014 matches the original resistance curve and bracket alignment exactly, so it seats correctly and reaches ignition temperature within seconds — the safe, factory-intended behavior.

Installation Difficulty

Easy (2/5). A single wire-harness connector and one or two mounting screws. Always disconnect power at the breaker before servicing. Handle the ceramic element only by the base — skin oils shorten igniter life. Most homeowners complete this swap in under 15 minutes with a nut driver.

Restore reliable furnace startup with the genuine Goodman B1401014.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Igniter ...

$22.95

Frequently Asked Questions

Does this Igniter fit my Goodman DMP150-52AB — B1401014?

Yes. This is the factory-specified OEM igniter for the Goodman DMP150-52AB — B1401014. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman DMP150-52AB — B1401014?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu