What are the specs for this Pressure Switch?

The correct replacement for Goodman model WPH4442AHAB — 0130M00074 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WPH4442AHAB — 0130M00074.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman High Pressure Cut-Off Switch for WPH4442AHAB — 0130M00074

Name: OEM Goodman High Pressure Cut-Off Switch for WPH4442AHAB — 0130M00074
Brand: Goodman
SKU: GOODMAN-15085
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-15085 Brand: Goodman

$34.95 $44.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130M00074 High Pressure Cut-Off Switch is a genuine OEM safety control engineered for the WPH4442AHAB packaged unit and compatible Goodman/Amana equipment. This normally-closed switch monitors refrigerant discharge pressure and opens the compressor control circuit when pressure climbs to an unsafe level — protecting the compressor from catastrophic overpressure damage caused by a dirty condenser coil, blocked airflow, an overcharged system, or a failing condenser fan.

Specifications

OEM Part Number: 0130M00074
Function: High-pressure cut-off (compressor protection)
Configuration: Auto-reset, normally closed
Fit: Goodman WPH4442AHAB and compatible models
Connection: Quick-connect spade terminals

OEM vs. Generic

Our OEM 0130M00074 is factory-calibrated to the exact cut-out/cut-in pressure spec Goodman engineered for this unit, guaranteeing correct trip points and warranty compliance. Lower-cost generic alternatives may use approximate pressure settings that trip early (nuisance lockouts) or late (reduced protection). For a critical safety component, OEM is the recommended choice.

Installation Difficulty

Easy — 2 of 5. Replacement is a straightforward swap of two spade terminals once the system is powered down and refrigerant pressure is confirmed. On Schrader-mounted versions, a valve-depressor fitting prevents refrigerant loss. If your switch is brazed or you are unsure of the connection type, we recommend a licensed HVAC technician. Always disconnect power at the breaker before servicing.

Restore reliable overpressure protection to your Goodman system with a genuine OEM switch.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman High Pressure Cut-Of...

$34.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman WPH4442AHAB — 0130M00074?

Yes. This is the factory-specified OEM pressure switch for the Goodman WPH4442AHAB — 0130M00074. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman WPH4442AHAB — 0130M00074?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu