What are the specs for this Pressure Switch?

The correct replacement for Goodman model DCH0600204BXXXAC — 0130M00074 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number DCH0600204BXXXAC — 0130M00074.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman High Pressure Cut-Off Switch for DCH0600204BXXXAC — 0130M00074

Name: OEM Goodman High Pressure Cut-Off Switch for DCH0600204BXXXAC — 0130M00074
Brand: Goodman
SKU: GOODMAN-9411
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-9411 Brand: Goodman

$34.95 $45.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130M00074 is a genuine OEM high-pressure cut-off switch for the DCH0600204BXXXAC packaged unit and compatible Goodman/Amana systems. Wired into the compressor safety circuit, this switch monitors refrigerant discharge pressure and opens the circuit to shut down the compressor if pressure climbs to an unsafe level — typically caused by a dirty condenser coil, failed condenser fan, overcharge, or restricted airflow. It is a critical protection device that prevents catastrophic compressor and line-set damage.

Specifications

Type: high-pressure (discharge-side) cut-off switch
Function: compressor over-pressure protection, auto or manual reset per design
OEM part number: 0130M00074
Brand: Goodman (fits Amana equivalents)
Fits: DCH0600204BXXXAC and compatible packaged units
Confirm trip/reset pressure and connection type against the original switch

OEM vs. Generic

The OEM 0130M00074 is factory-calibrated to the correct trip and reset pressures for this platform. Generic switches may carry different setpoints or fittings, risking nuisance trips or, worse, failure to protect the compressor. Because this part safeguards the most expensive component in the system, the genuine OEM switch is strongly recommended.

Installation Difficulty

Moderate (3/5). Most versions thread onto a Schrader-style port or splice into the safety circuit. Refrigerant-side work should be handled by an EPA-certified technician; low-voltage-only versions are simpler. Disconnect power, relieve pressure where required, and match the electrical leads exactly. Budget 30–45 minutes. When in doubt, use a licensed HVAC professional.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman High Pressure Cut-Of...

$34.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman DCH0600204BXXXAC — 0130M00074?

Yes. This is the factory-specified OEM pressure switch for the Goodman DCH0600204BXXXAC — 0130M00074. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman DCH0600204BXXXAC — 0130M00074?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu