What are the specs for this Pressure Switch?

The correct replacement for Goodman model DCC300XXX4BFXXAB — 0130M00074 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number DCC300XXX4BFXXAB — 0130M00074.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman High Pressure Cut-Off Switch for DCC300XXX4BFXXAB — 0130M00074

Name: OEM Goodman High Pressure Cut-Off Switch for DCC300XXX4BFXXAB — 0130M00074
Brand: Goodman
SKU: GOODMAN-585
Price: 41.94 USD
Availability: InStock

SKU: GOODMAN-585 Brand: Goodman

$41.94 $56.62

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130M00074 High Pressure Cut-Off Switch is a genuine OEM refrigerant-circuit safety control engineered for the Goodman DCC300XXX4BFXXAB commercial packaged air conditioner and compatible R-410A units. This switch monitors discharge-line pressure and interrupts the compressor circuit before dangerously high head pressure can damage the compressor, condenser coil, or refrigerant lines — protecting your most expensive components from a single fault.

Specifications

Function: High-side pressure cut-off (compressor protection)
Trip point: Opens at approximately 610 PSI (R-410A rated)
Reset: Automatic close at approximately 420 PSI
Connection: Quick-connect / spade terminals
Fits: Goodman DCC300XXX4BFXXAB and related Goodman/Amana condensing units

OEM vs. Generic

The OEM 0130M00074 is calibrated to Goodman's exact factory trip and reset thresholds, ensuring the unit's safety logic behaves precisely as designed and keeping any equipment warranty intact. Generic universal pressure switches are lower cost but may use approximate set points and looser tolerances, which can cause nuisance trips or allow pressure to climb higher than intended before opening. For a safety-critical control, OEM is the recommended choice.

Installation

Difficulty: Moderate. Replacement requires disconnecting power, isolating refrigerant if the switch is brazed inline (many use a Schrader fitting, which avoids recovery), and verifying terminal orientation. Best performed by an EPA-certified HVAC technician. Confirm continuity and reset behavior before returning the system to service.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman High Pressure Cut-Of...

$41.94

Frequently Asked Questions

Does this Pressure Switch fit my Goodman DCC300XXX4BFXXAB — 0130M00074?

Yes. This is the factory-specified OEM pressure switch for the Goodman DCC300XXX4BFXXAB — 0130M00074. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman DCC300XXX4BFXXAB — 0130M00074?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu