What are the specs for this Pressure Switch?

The correct replacement for Goodman model APH1642H41AB — 0130M00074 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number APH1642H41AB — 0130M00074.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman High Pressure Cut-Off Switch for APH1642H41AB — 0130M00074

Name: OEM Goodman High Pressure Cut-Off Switch for APH1642H41AB — 0130M00074
Brand: Goodman
SKU: GOODMAN-15859
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-15859 Brand: Goodman

$34.95 $45.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130M00074 High Pressure Cut-Off Switch

The 0130M00074 is a genuine Goodman/Amana OEM high pressure cut-off switch built for the APH1642H41AB package heat pump. Wired into the compressor control circuit, this normally-closed safety switch opens when discharge (high-side) refrigerant pressure exceeds its factory trip setpoint — protecting the compressor from damage caused by a blocked condenser, failed fan, overcharge, or restricted airflow. A weak or failed switch causes nuisance trips, no-cool lockouts, or, worse, no protection at all.

Specifications

Part number: 0130M00074
Part type: High pressure limit / cut-off safety switch
Action: Normally closed, opens on high discharge pressure (auto-reset)
Fits model: APH1642H41AB (Goodman package heat pump)
Brand: Goodman / Amana OEM

OEM vs. Generic

The trip and reset pressure setpoints on this switch are calibrated to the APH1642H41AB refrigerant circuit. A generic switch with the wrong setpoint or fitting either trips too early or fails to protect the compressor. This OEM switch matches the factory setpoint, fitting, and terminal configuration exactly.

Installation Difficulty

Moderate (3/5). Most versions mount on a Schrader-style port so the system does not need to be evacuated, but any refrigerant-side work should be done by an EPA-certified technician. Disconnect power, transfer the wire leads, and thread in the new switch.

Always disconnect power before servicing. Refrigerant-circuit work must comply with EPA Section 608 requirements.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman High Pressure Cut-Of...

$34.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman APH1642H41AB — 0130M00074?

Yes. This is the factory-specified OEM pressure switch for the Goodman APH1642H41AB — 0130M00074. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman APH1642H41AB — 0130M00074?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu