What are the specs for this Pressure Switch?

The correct replacement for Goodman model APH1636H41AA — 0130M00074 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number APH1636H41AA — 0130M00074.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman High Pressure Cut-Off Switch for APH1636H41AA — 0130M00074

Name: OEM Goodman High Pressure Cut-Off Switch for APH1636H41AA — 0130M00074
Brand: Goodman
SKU: GOODMAN-15814
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-15814 Brand: Goodman

$34.95 $45.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130M00074 High Pressure Cut-Off Switch

The Goodman 0130M00074 is a genuine OEM high-pressure cut-off switch for the APH1636H41AA heat pump. Wired into the safety circuit, it continuously monitors discharge-side refrigerant pressure and opens the circuit to shut down the compressor if pressure climbs to an unsafe level — protecting against a blocked condenser, failed fan, or overcharge. When this switch nuisance-trips or sticks open, the system locks out on a safety fault; a fresh OEM switch restores normal operation.

Specifications

OEM Part Number: 0130M00074
Compatible Model: APH1636H41AA
Equipment Type: Heat Pump
Function: High-side pressure safety cut-off
Type: Auto-reset SPST pressure switch, factory trip setpoint
Fit: Direct replacement — matches OEM port fitting and terminal spades

OEM vs. Generic

A safety switch is only useful if it trips at the correct pressure. This genuine Goodman switch is factory-calibrated to the cut-out and reset points the system was designed for. Generic switches with slightly different setpoints can trip too early (nuisance lockouts) or too late (no protection). OEM ensures the safety circuit behaves exactly as engineered.

Installation Difficulty

Rating: Moderate (EPA 608 recommended). Many pressure switches thread onto a Schrader-style fitting that seals without opening the system, while others require recovery. Disconnect power, transfer the two spade wires, thread on the new switch, and verify the safety circuit closes. Confirm operating pressures after startup.

Keep your Goodman heat pump's compressor protected with a genuine, correctly calibrated safety switch.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman High Pressure Cut-Of...

$34.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman APH1636H41AA — 0130M00074?

Yes. This is the factory-specified OEM pressure switch for the Goodman APH1636H41AA — 0130M00074. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman APH1636H41AA — 0130M00074?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu