What are the specs for this Pressure Switch?

The correct replacement for Goodman model APH1630M41AA — 0130M00074 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number APH1630M41AA — 0130M00074.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman High Pressure Cut-Off Switch for APH1630M41AA — 0130M00074

Name: OEM Goodman High Pressure Cut-Off Switch for APH1630M41AA — 0130M00074
Brand: Goodman
SKU: GOODMAN-15803
Price: 44.95 USD
Availability: InStock

SKU: GOODMAN-15803 Brand: Goodman

$44.95 $58.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130M00074 High Pressure Cut-Off Switch

The Goodman 0130M00074 is a genuine OEM high-pressure cut-off switch for the Goodman/Amana APH1630M41AA heat pump. Mounted on the high side of the refrigerant circuit, this safety switch opens the control circuit if discharge pressure climbs to an unsafe level — protecting the compressor from damage caused by a dirty condenser coil, blocked airflow, or overcharge. If your system trips on a high-pressure lockout or the compressor won't start, a faulty switch is a frequent culprit.

Specifications

Part type: High-pressure safety cut-off switch
Refrigerant: R-410A high-side circuit
Nominal set points: ~610 PSI open / ~420 PSI reset (auto-reset — verify against Goodman spec sheet for your unit)
Fits model: APH1630M41AA (16 SEER heat pump)
Connection: Factory quick-connect terminals

OEM vs. Generic

The OEM 0130M00074 is factory-calibrated to the exact trip and reset thresholds Goodman engineered for this system. Generic switches with approximate set points can nuisance-trip or, worse, fail to protect the compressor. For a safety-critical device, exact-fit OEM is strongly recommended.

Installation

Difficulty: Advanced. This switch sits on the pressurized refrigerant circuit. If it's a sealed-port replacement, recovery and recharge by an EPA 608-certified technician is required. De-energize the unit and follow all refrigerant-handling regulations. Not a homeowner DIY job unless it is a quick-connect service-port type.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman High Pressure Cut-Of...

$44.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman APH1630M41AA — 0130M00074?

Yes. This is the factory-specified OEM pressure switch for the Goodman APH1630M41AA — 0130M00074. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman APH1630M41AA — 0130M00074?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu