What are the specs for this Pressure Switch?

The correct replacement for Goodman model APH1624H41AB — 0130M00074 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number APH1624H41AB — 0130M00074.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman High Pressure Cut-Off Switch for APH1624H41AB — 0130M00074

Name: OEM Goodman High Pressure Cut-Off Switch for APH1624H41AB — 0130M00074
Brand: Goodman
SKU: GOODMAN-15759
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-15759 Brand: Goodman

$34.95 $45.45

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130M00074 High Pressure Cut-Off Switch

The Goodman 0130M00074 is a genuine OEM high-pressure cut-off switch designed as a direct-fit replacement for the Goodman/Amana APH1624H41AB packaged heat pump. This refrigerant-side safety control monitors discharge-line pressure and opens the control circuit to shut down the compressor if pressure climbs to an unsafe level — protecting the compressor, coil, and refrigerant charge from damage caused by a dirty condenser, failed fan, or overcharge. A failed or stuck switch causes nuisance trips or, worse, no protection at all.

Specifications

OEM Part Number: 0130M00074
Component Type: High-pressure cut-off safety switch (auto-reset)
Compatible Model: APH1624H41AB
Brand: Goodman / Amana
Equipment: Packaged Heat Pump
Factory-calibrated trip/reset set points

OEM vs. Generic

The genuine OEM 0130M00074 arrives calibrated to the exact cut-out and reset pressures specified for your system, with the correct fitting and electrical terminals. Generic switches may carry different set points or thread/spade configurations, compromising compressor protection. Choose OEM for a safety component.

Installation Difficulty

Rating: Moderate. Involves refrigerant-side work — recover charge or use a Schrader-mount fitting as applicable, disconnect power, swap the spade connectors, and thread in the new switch. EPA certification is required for any refrigerant handling. Leak-check after installation.

Confirm OEM part number 0130M00074 and model APH1624H41AB on your unit's service label before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman High Pressure Cut-Of...

$34.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman APH1624H41AB — 0130M00074?

Yes. This is the factory-specified OEM pressure switch for the Goodman APH1624H41AB — 0130M00074. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman APH1624H41AB — 0130M00074?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu