What are the specs for this Pressure Switch?

The correct replacement for Goodman model APH1448M41AA — 0130M00074 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number APH1448M41AA — 0130M00074.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman High Pressure Cut-Off Switch for APH1448M41AA — 0130M00074

Name: OEM Goodman High Pressure Cut-Off Switch for APH1448M41AA — 0130M00074
Brand: Goodman
SKU: GOODMAN-15452
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-15452 Brand: Goodman

$34.95 $45.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130M00074 High Pressure Cut-Off Switch is a genuine OEM safety control for the APH1448M41AA heat pump and compatible Goodman/Amana R-410A systems. Wired into the compressor control circuit, this normally-closed switch opens when discharge (high-side) pressure climbs into an unsafe range — from a dirty condenser coil, blocked airflow, or overcharge — shutting the compressor down before damage occurs. It resets automatically once pressure returns to a safe level.

OEM Part Number: 0130M00074
Type: High-side pressure cut-out switch (normally closed)
Approx. Trip / Reset: ~610 PSI open / ~420 PSI reset (R-410A)
Fits Model: APH1448M41AA (Goodman heat pump)
Connection: Quick-connect spade terminals
Fitting: Refrigerant port with Schrader/threaded fitting

OEM vs. Generic

The factory Goodman switch is calibrated to the exact cut-out and reset set-points specified for this unit. Generic switches may carry different trip pressures or incompatible fittings, causing nuisance trips or — worse — failing to protect the compressor. Match set-points exactly; OEM removes the guesswork.

Installation

Difficulty: Moderate (Intermediate). Many high-pressure switches thread onto a Schrader-style port and can be replaced without full refrigerant recovery, but confirm your fitting type first. Disconnect power at the breaker, transfer the wiring one lead at a time, and check for leaks with electronic detector or bubbles after install. EPA 608 handling applies if the line must be opened.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman High Pressure Cut-Of...

$34.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman APH1448M41AA — 0130M00074?

Yes. This is the factory-specified OEM pressure switch for the Goodman APH1448M41AA — 0130M00074. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman APH1448M41AA — 0130M00074?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu