What are the specs for this Pressure Switch?

The correct replacement for Goodman model APH1442H41EB — 0130M00074 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number APH1442H41EB — 0130M00074.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman High Pressure Cut-Off Switch for APH1442H41EB — 0130M00074

Name: OEM Goodman High Pressure Cut-Off Switch for APH1442H41EB — 0130M00074
Brand: Goodman
SKU: GOODMAN-15415
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-15415 Brand: Goodman

$34.95 $45.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130M00074 High Pressure Cut-Off Switch

The Goodman 0130M00074 is a genuine OEM high pressure cut-off switch engineered for the APH1442H41EB Amana/Goodman packaged heat pump and compatible 14 SEER, 3.5-ton systems. This normally-closed safety control monitors discharge-line refrigerant pressure and opens the compressor circuit if pressure climbs to an unsafe level — protecting the compressor from damage caused by a blocked condenser, dirty coil, overcharge, or failed fan motor. It automatically resets once pressure returns to a safe operating range.

Genuine OEM Goodman replacement part
Type: High-side (discharge) pressure cut-off switch
Function: Normally closed, opens on high pressure, auto-reset
Direct fit for APH1442H41EB and related APH14 packaged heat pumps
Factory-calibrated cut-out/cut-in set points
Brass fitting with sealed electrical connector

OEM vs. Generic

Choosing the genuine Goodman 0130M00074 guarantees factory-matched pressure set points and connector geometry, so the switch trips exactly when the control board expects it to. Generic universal switches often carry different cut-out thresholds and spade orientations, which can lead to nuisance lockouts or, worse, failure to protect the compressor. For a safety-critical control, OEM is strongly recommended.

Installation Difficulty

Moderate. Requires recovering refrigerant or working on a Schrader-equipped port, so this repair should be performed by an EPA 608-certified technician. Plan for 30–45 minutes plus system leak-check and evacuation where applicable.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman High Pressure Cut-Of...

$34.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman APH1442H41EB — 0130M00074?

Yes. This is the factory-specified OEM pressure switch for the Goodman APH1442H41EB — 0130M00074. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman APH1442H41EB — 0130M00074?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu