What are the specs for this Pressure Switch?

The correct replacement for Goodman model APH1360H41DA — 0130M00074 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number APH1360H41DA — 0130M00074.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman High Pressure Cut-Off Switch for APH1360H41DA — 0130M00074

Name: OEM Goodman High Pressure Cut-Off Switch for APH1360H41DA — 0130M00074
Brand: Goodman
SKU: GOODMAN-0130M00074
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-0130M00074 Brand: Goodman

$34.95 $45.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130M00074 High Pressure Cut-Off Switch is a genuine OEM safety control designed for the APH1360H41DA heat pump and compatible Goodman and Amana systems. Wired into the compressor control circuit, this switch senses discharge-side refrigerant pressure and opens instantly when pressure exceeds the factory cut-out limit — protecting the compressor and refrigerant lines from overpressure caused by a dirty condenser coil, failed fan motor, restricted airflow, or overcharge.

Specifications

Part Number: 0130M00074
Type: High pressure limit / cut-off switch
Function: Compressor overpressure protection
Connection: 1/4 in. SAE flare / factory spade terminals
Fits Model: APH1360H41DA
Brand Compatibility: Goodman / Amana

OEM vs. Generic

The 0130M00074 is factory-calibrated to Goodman's exact high-side trip and reset points and plugs directly onto the existing harness. Universal high pressure switches require confirming pressure settings and often need fitting adapters; an incorrect trip point either fails to protect the compressor or causes nuisance shutdowns on hot days. The OEM part eliminates that uncertainty.

Installation

Difficulty: Moderate. Requires refrigerant isolation or recovery at the flare/service connection and should be handled by an EPA 608 certified technician. Allow 30–45 minutes. Disconnect power and relieve system pressure before removing the switch, and verify operation after recharge.

Protect your compressor with a genuine Goodman high pressure safety control.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman High Pressure Cut-Of...

$34.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman APH1360H41DA — 0130M00074?

Yes. This is the factory-specified OEM pressure switch for the Goodman APH1360H41DA — 0130M00074. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman APH1360H41DA — 0130M00074?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu