What are the specs for this Pressure Switch?

The correct replacement for Goodman model APH1330M41CA — 0130M00074 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number APH1330M41CA — 0130M00074.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman High Pressure Cut-Off Switch for APH1330M41CA — 0130M00074

Name: OEM Goodman High Pressure Cut-Off Switch for APH1330M41CA — 0130M00074
Brand: Goodman
SKU: GOODMAN-15235
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-15235 Brand: Goodman

$34.95 $44.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130M00074 High Pressure Cut-Off Switch is a factory OEM safety control engineered for the APH1330M41CA packaged heat pump and compatible Goodman/Amana R-410A systems. This automatic-reset switch continuously monitors discharge-side pressure and opens the control circuit if head pressure climbs to an unsafe level — protecting the compressor from damage caused by a dirty condenser coil, blocked airflow, overcharge, or a failing fan motor.

Specifications

Part type: High pressure cut-off (HPCO) switch
Refrigerant: R-410A rated
Reset: Automatic (closes as pressure normalizes)
Typical action: Opens on high discharge pressure, re-closes after pressure drop
Connection: Quick-connect spade terminals
Fits: APH1330M41CA and select Goodman/Amana heat pump platforms

OEM vs. Generic

This is a genuine OEM-spec control built to the exact trip and reset thresholds Goodman engineered for this equipment. Generic universal switches often use approximate cut-out points that can cause nuisance trips or fail to protect the compressor at the correct pressure. When a safety device stands between your compressor and a costly failure, matching the OEM specification is the smart choice.

Installation Difficulty

Moderate — This is a sealed-system component. Terminal swap is simple, but if the switch is brazed or Schrader-mounted on the refrigerant circuit, recovery and evacuation may be required. Recommended for HVAC professionals or advanced DIYers with EPA 608 certification. Always disconnect power and verify refrigerant handling requirements before service.

Restore your heat pump's factory safety protection with a part that meets Goodman's original engineering specification.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman High Pressure Cut-Of...

$34.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman APH1330M41CA — 0130M00074?

Yes. This is the factory-specified OEM pressure switch for the Goodman APH1330M41CA — 0130M00074. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman APH1330M41CA — 0130M00074?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu