What are the specs for this Flame Sensor?

The correct replacement for Goodman model GCH950905DXAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GCH950905DXAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Furnace Flame Sensor for GCH950905DXAB — 0130F00010S

Name: OEM Goodman Furnace Flame Sensor for GCH950905DXAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-10033
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-10033 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Furnace Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor built as a direct-fit replacement for the GCH950905DXAB gas furnace and compatible Goodman/Amana models. The flame sensor is a critical safety component: it uses flame rectification to confirm the burner has ignited, signaling the control board to keep the gas valve open. When the sensing rod becomes coated with oxide or carbon, the microamp signal weakens and the board shuts off gas within seconds — producing the classic symptoms of a furnace that lights briefly then short-cycles, or locks out on no-heat. Replacing a worn or contaminated sensor with the correct OEM part restores reliable flame proving and steady heat.

Specifications

OEM Part Number: 0130F00010S
Type: Flame sensor (flame rectification rod)
Brand: Goodman
Fits: GCH950905DXAB and compatible Goodman/Amana furnaces
Function: Confirms burner flame, proves ignition to control board
Application: Gas furnaces with hot-surface or spark ignition

OEM vs. Generic

The genuine 0130F00010S uses the exact rod length, bracket geometry, and terminal that Goodman's control board expects, delivering a stable microamp flame signal. Generic sensors may mount at the wrong depth in the flame envelope, causing weak or intermittent readings and repeat lockouts. For a dependable no-heat fix, the OEM sensor is the right part.

Installation Difficulty

Moderate (2/5). Turn off gas and power, remove the single mounting screw, unplug the wire terminal, and install the new sensor. Route the lead clear of hot surfaces. A multimeter check of flame current is recommended but not required.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Furnace Flame Sensor...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GCH950905DXAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GCH950905DXAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GCH950905DXAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu