What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMS80703ANAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMS80703ANAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Furnace Flame Sensor for AMS80703ANAA — 0130F00010S

Name: OEM Goodman Furnace Flame Sensor for AMS80703ANAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-0130F00010S
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-0130F00010S Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S flame sensor is a genuine OEM replacement engineered for the Amana/Goodman AMS80703ANAA 80% single-stage gas furnace and other compatible models. The flame sensor uses flame rectification to confirm the burner has ignited; when it fails, the control board shuts the gas valve as a safety measure, causing short-cycling or a furnace that lights then drops out after a few seconds. Replacing this inexpensive part restores dependable heat.

Specifications

OEM Part Number: 0130F00010S
Fits Model: AMS80703ANAA (Amana/Goodman 80% furnace)
Type: Single-rod flame rectification sensor
Function: Confirms burner ignition, signals control board
Material: Kanthal sensing rod with ceramic insulator

OEM vs. Generic

Our OEM version matches Goodman's exact rod length, bracket geometry, and terminal for a guaranteed fit and factory microamp response. A generic equivalent covers the same function at a lower cost but may require minor bracket adjustment. Both restore reliable flame detection.

Install Difficulty

Easy (1/5) — one screw and one spade connector. Cut power at the furnace switch, remove the burner-compartment door, unscrew the old sensor, transfer the wire, and reinstall. 10-minute job for most homeowners.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Furnace Flame Sensor...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMS80703ANAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMS80703ANAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMS80703ANAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu