What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACVC90905DXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVC90905DXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Furnace Flame Sensor for ACVC90905DXAA — 0130F00010S

Name: OEM Goodman Furnace Flame Sensor for ACVC90905DXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2698
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2698 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement for the Goodman ACVC90905DXAA condensing gas furnace. The flame sensor uses flame rectification to confirm the burner has lit; when it becomes coated with oxide or carbon, the control board can no longer detect flame and shuts the gas valve — causing the classic symptoms of a furnace that lights briefly then shuts off, short-cycles, or fails to heat. Replacing a worn or fouled sensor restores reliable ignition.

Specifications

OEM Part Number: 0130F00010S
Part Type: Flame sensor (flame rectification rod)
Brand: Goodman (genuine OEM)
Compatible Model: ACVC90905DXAA condensing furnace
Function: Confirms burner flame to the ignition control
Category: Ignition / flame sensing

OEM vs. Generic

The OEM 0130F00010S is built with the correct rod length, bracket geometry, and terminal so it mounts in the original location and reads flame current within Goodman's spec. Generic sensors often sit at the wrong position in the flame envelope or carry a different microamp signature, leading to intermittent lockouts. For a no-heat repair you only want to do once, factory-original is the right call.

Installation Difficulty

Easy (DIY-friendly). Roughly 15 minutes. Turn off power and gas, remove the burner-compartment screw holding the sensor, unplug the lead, and install the new 0130F00010S. Avoid touching the rod with bare fingers. Restore power and confirm a clean light and steady flame. If you are not comfortable working near the gas valve and burners, use a licensed HVAC technician.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Furnace Flame Sensor...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACVC90905DXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACVC90905DXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACVC90905DXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu