What are the specs for this Flame Sensor?

The correct replacement for Goodman model WFD195090S4CAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WFD195090S4CAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor Rod for WFD195090S4CAA — 0130F00010S

Name: OEM Goodman Flame Sensor Rod for WFD195090S4CAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-13988
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-13988 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine OEM Goodman 0130F00010S flame sensor is the exact factory replacement rod for the WFD195090S4CAA gas furnace. The flame sensor confirms the presence of a burner flame using microamp rectification; when it becomes coated, corroded, or cracked, the control board can no longer verify flame and shuts down the gas valve — causing short-cycling, intermittent heat, or full ignition lockouts.

Specifications

OEM Part Number: 0130F00010S
Type: Flame sensor / flame rectification rod
Fits: Goodman WFD195090S4CAA and compatible Goodman & Amana furnaces
Function: Verifies burner flame via microamp signal to the control board
Includes: Sensor rod with mounting bracket and terminal
High-temperature alloy tip for consistent flame sensing

OEM vs. Generic

Generic flame rods often have the wrong rod length, bend, or terminal, producing a weak microamp signal that leads to nuisance lockouts even when the burner is lit. The genuine 0130F00010S delivers the exact rod geometry and material the WFD195090S4CAA control logic expects, restoring a strong, stable flame-sense signal.

Installation Difficulty

Easy (2/5). Shut off power and gas first. Remove the single mounting screw, unplug the sensor wire, and install the new rod — avoid touching the sensing tip with bare hands. Replacement typically takes 10–15 minutes. If short-cycling persists after installation, have a technician verify the microamp reading and burner condition.

Eliminate flame-loss faults on your Goodman furnace with the genuine 0130F00010S flame sensor.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor Rod for...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman WFD195090S4CAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman WFD195090S4CAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman WFD195090S4CAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu