What are the specs for this Flame Sensor?

The correct replacement for Goodman model VDS80804BNAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number VDS80804BNAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor Rod for VDS80804BNAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor Rod for VDS80804BNAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-13526
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-13526 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod built for the Goodman VDS80804BNAA furnace and compatible hot-surface-ignition gas furnaces. The flame sensor confirms that a flame is present after ignition; when it degrades from oxidation or age, the control board fails to detect flame and shuts the gas valve, causing short-cycling, ignition lockouts, or intermittent no-heat calls. Replacing this inexpensive part is one of the most common cures for a furnace that lights then drops out after a few seconds.

Specifications

Part Number: 0130F00010S
Type: Flame sensor / flame-rectification rod
Brand: Goodman (OEM)
Fits Model: VDS80804BNAA and compatible Goodman/Amana furnaces
Function: Detects micro-amp flame signal for the ignition control
Mounting: Single-screw burner-assembly mount

OEM vs. Generic

This factory OEM sensor uses the correct rod length, alloy, and bracket geometry to sit properly in the flame envelope of the VDS80804BNAA burner. Generic sensors can read a weak micro-amp signal or sit at the wrong flame depth, leading to nuisance lockouts even when freshly installed.

Install Difficulty

Easy. Turn off power, remove one mounting screw, unplug the wire lead, and install the replacement. Typical time is 10–15 minutes and requires only a nut driver. A great first fix for intermittent heating faults.

Inspected and fitment-guaranteed for the VDS80804BNAA and listed compatible models.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor Rod for...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman VDS80804BNAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman VDS80804BNAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman VDS80804BNAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu