What are the specs for this Flame Sensor?

The correct replacement for Goodman model GMTH070-4A Gas Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMTH070-4A Gas Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor Rod for GMTH070-4A Gas Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor Rod for GMTH070-4A Gas Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-12553
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-12553 Brand: Goodman

$34.95 $46.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine Goodman 0130F00010S Flame Sensor is the OEM flame-rectification rod that confirms burner ignition in your Goodman GMTH070-4A gas furnace. A weak or failed flame sensor is one of the most common causes of short cycling and no-heat lockouts — the control board shuts the gas valve when it cannot detect flame. Replacing it with a genuine sensor restores dependable, safe operation.

Specifications

OEM Part Number: 0130F00010S
Type: Flame rectification sensor rod
Signal: Micro-amp flame current detection
Material: High-temperature Kanthal rod with ceramic insulator
Fits: Goodman GMTH070-4A and compatible furnace models
Function: Proves flame to the ignition control

OEM vs. Generic

The genuine Goodman OEM 0130F00010S provides the correct rod length, insulator, and mounting so the tip sits properly in the flame for a strong micro-amp signal. Generic sensors may sit too shallow or read low, causing nuisance lockouts. This is a low-cost, high-impact repair where OEM reliability pays off.

Installation Difficulty

Easy (1/5). Typically one screw and a single spade connector. Shut off power and gas, remove the old rod, install the new sensor, and restore power. Estimated time: 10–15 minutes. Avoid touching the rod tip with bare fingers. A licensed technician can verify flame current if lockouts persist.

Genuine Goodman quality to keep your furnace lighting reliably.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor Rod for...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GMTH070-4A Gas Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GMTH070-4A Gas Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GMTH070-4A Gas Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu