What are the specs for this Flame Sensor?

The correct replacement for Goodman model GKS91155DXAE — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GKS91155DXAE — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor Rod for GKS91155DXAE — 0130F00010S

Name: OEM Goodman Flame Sensor Rod for GKS91155DXAE — 0130F00010S
Brand: Goodman
SKU: GOODMAN-10967
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-10967 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the GKS91155DXAE gas furnace. It verifies the presence of a burner flame during each heating cycle; if the control board doesn't detect flame current through this rod, it shuts off the gas valve as a safety measure. A dirty or failed sensor is the single most common cause of furnace short-cycling and intermittent no-heat calls.

Specifications

Part number: 0130F00010S
Type: Single-rod flame rectification sensor
Function: Proves burner flame, signals control board
Compatible model: GKS91155DXAE
Mounting: OEM bracket and terminal — direct fit

OEM vs. Generic

Genuine Goodman flame sensors use the correct rod length, alloy, and insulator rating to sit precisely in the burner flame and generate a stable microamp signal. Generic rods often produce a weak or noisy signal that trips the flame-fault lockout, leaving you with the same short-cycling problem you set out to fix.

Installation Difficulty

Easy. One of the most beginner-friendly furnace repairs: cut power, remove a single mounting screw, unplug the wire terminal, and install the new sensor. No gas line work is involved. A homeowner comfortable with basic tools can typically complete this in under 15 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor Rod for...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GKS91155DXAE — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GKS91155DXAE — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GKS91155DXAE — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu