What are the specs for this Flame Sensor?

The correct replacement for Goodman model GKS90453BXAE — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GKS90453BXAE — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor Rod for GKS90453BXAE — 0130F00010S

Name: OEM Goodman Flame Sensor Rod for GKS90453BXAE — 0130F00010S
Brand: Goodman
SKU: GOODMAN-10579
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-10579 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor rod engineered as a direct-fit replacement for the GKS90453BXAE gas furnace. The flame sensor uses flame rectification to confirm the burners have actually lit; if it fails to detect flame, the control board closes the gas valve within seconds as a safety measure. A dirty, corroded, or cracked sensor is the single most common cause of furnaces that ignite and then shut off after a few seconds (short cycling on flame failure).

Specifications

Type: Flame rectification sensor rod
Function: Proves burner flame to the control board
Fit: Goodman GKS90453BXAE gas furnace
Construction: High-temperature rod with ceramic insulator and spade terminal
OEM Part Number: 0130F00010S

OEM vs. Generic

The OEM Goodman 0130F00010S matches the exact rod length, bend, mounting bracket, and terminal the furnace was built for, so it sits correctly in the flame envelope and reads a strong microamp signal. Generic flame sensors are available cheaper, but incorrect rod position weakens the flame-sense current and leads to intermittent lockouts. For dependable ignition proving we recommend the genuine OEM sensor.

Install Difficulty

Easy (2 of 5). Power down the furnace, remove the single mounting screw, unplug the wire, and install the new sensor — typically under 15 minutes. Avoid touching the metal rod with bare fingers, and route the wire clear of hot surfaces. This is one of the most satisfying DIY furnace repairs.

Backed by our fit guarantee. Not sure it matches your unit? Email info@nationalhvacparts.com with your model and serial number.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor Rod for...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman GKS90453BXAE — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman GKS90453BXAE — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman GKS90453BXAE — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu