What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH80904BXCB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80904BXCB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor Rod for AMH80904BXCB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor Rod for AMH80904BXCB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-5827
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-5827 Brand: Goodman

$34.95 $45.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor rod for the Amana / Goodman AMH80904BXCB gas furnace. The flame sensor uses flame rectification to prove that the burners have lit — sending a micro-amp signal back to the control board. When the sensor becomes coated with oxide or fails, the furnace lights briefly then shuts down (short-cycles) or locks out on ignition failure, leaving you with no heat.

Specifications

Type: Single-rod flame rectification sensor
Signal: Micro-amp flame current to ignition control
Mounting: Single-screw burner-assembly bracket
Symptoms fixed: Short-cycling, ignition lockout, intermittent no-heat
Fits: Amana & Goodman AMH80904BXCB and related 80% furnaces

OEM vs. Generic

The OEM sensor uses the correct rod length, alloy, and ceramic insulator so flame current reads within the control board's expected range. Generic rods sometimes read low, causing nuisance lockouts. For reliable ignition proving, OEM is the safe choice.

Installation Difficulty

Easy (2/5). One mounting screw and one push-on connector. Power off first. This is one of the most common furnace no-heat repairs — many DIYers complete it in 10–15 minutes. Tip: replace rather than sand a badly worn rod for a lasting fix.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor Rod for...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH80904BXCB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH80904BXCB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH80904BXCB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu