What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACVM970803BNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVM970803BNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor Rod for ACVM970803BNAA — 0130F00010S

Name: OEM Goodman Flame Sensor Rod for ACVM970803BNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-3016
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-3016 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The 0130F00010S is the genuine OEM flame sensor (flame-rectification rod) for the Goodman/Amana ACVM970803BNAA modulating gas furnace. After ignition, the control board uses this rod to confirm flame presence via micro-amp rectification current; if it can't sense flame within the trial-for-ignition window, the board closes the gas valve and locks out for safety. A dirty, corroded, or cracked flame sensor is the single most common cause of a furnace that lights briefly and then shuts off (short-cycling).

Specifications

Function: Flame proving / rectification sensor
Signal: Micro-amp DC flame current (typ. 1–6 µA)
Element: High-temperature Kanthal sensing rod with ceramic insulator
Connection: Single push-on spade terminal
Fits: Goodman & Amana ACVM970803BNAA and compatible models
OEM Part No.: 0130F00010S

OEM vs. Generic

The OEM 0130F00010S uses the correct rod length, alloy, and insulator rating so it reads a stable flame signal and sits in the proper flame envelope. Generic rods often have the wrong rod geometry, producing weak or noisy micro-amp readings that trigger intermittent lockouts. Given the low cost, genuine OEM is the safe choice.

Install Difficulty

Easy (1/5). One screw and one spade connector — about 10 minutes. Shut off power first. Tip: if the old sensor is just dirty, light sanding with fine emery cloth often restores it, but rods that are pitted or cracked should be replaced.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor Rod for...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACVM970803BNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACVM970803BNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACVM970803BNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu