What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACVC81005CXBD Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVC81005CXBD Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor Rod for ACVC81005CXBD Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor Rod for ACVC81005CXBD Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2658
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2658 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the ACVC81005CXBD gas furnace and compatible models. The flame sensor confirms to the control board that a burner flame is present after ignition; if the rod is dirty, corroded, or cracked, the board shuts down the gas valve as a safety measure, causing short cycling or no-heat conditions. Replacing a worn sensor is one of the most common and reliable furnace repairs.

Specifications

Type: Flame rectification sensor rod
Function: Verifies burner flame presence to the control board
OEM Part Number: 0130F00010S
Fits: Goodman ACVC81005CXBD and compatible furnaces
Connection: Single-wire spade terminal

OEM vs. Generic

The genuine Goodman OEM sensor provides the correct rod length, mounting bracket, and metallurgy for stable micro-amp signal output. Generic sensors are inexpensive but can sit at the wrong flame position, producing weak or erratic signals. For dependable flame proving, OEM is preferred.

Install Difficulty

Easy (1/5) — One mounting screw and one spade connector. Shut off power, swap the sensor, and confirm the flame-sense micro-amp reading after restart. Avoid touching the rod with bare hands.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor Rod for...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACVC81005CXBD Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACVC81005CXBD Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACVC81005CXBD Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu