What are the specs for this Flame Sensor?

The correct replacement for Goodman model WGGE4348A070MAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WGGE4348A070MAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for WGGE4348A070MAB — 0130F00010S

Name: OEM Goodman Flame Sensor for WGGE4348A070MAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-14695
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-14695 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The 0130F00010S is a genuine OEM flame sensor (flame rod) engineered for the Goodman WGGE4348A070MAB gas furnace and compatible Goodman/Amana models. The flame sensor confirms the burner has ignited by generating a micro-amp rectification signal to the control board. When this rod degrades or becomes oxidized, the furnace lights briefly then shuts down on a flame-loss lockout — one of the most common no-heat calls. Replacing it restores dependable, safe ignition cycles.

Specifications

OEM Part Number: 0130F00010S
Compatible Model: WGGE4348A070MAB
Equipment: Gas Furnace
Function: Flame rectification / flame proving
Type: Direct-fit single-rod sensor with mounting bracket
Signal output: Micro-amp DC to ignition control board

OEM vs. Generic

Our OEM Goodman sensor uses factory-spec Kanthal rod material and correct rod length/geometry, ensuring the flame signal stays within the control board's proving window. Generic aftermarket sensors often use thinner rods that oxidize faster and can produce marginal signals, leading to nuisance lockouts. For long-term reliability, OEM is the recommended choice.

Installation Difficulty

Easy (1/5) — Typically a single-screw replacement at the burner assembly with one push-on wire connector. Always disconnect power before servicing. Gently clean the mating surface and route the wire clear of the burner flame. Most homeowners with basic tools complete this in under 15 minutes.

Backed by genuine OEM quality for the NationalHVACParts.com catalog.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for WGG...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman WGGE4348A070MAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman WGGE4348A070MAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman WGGE4348A070MAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu