What are the specs for this Flame Sensor?

The correct replacement for Goodman model WGGE4336A090MAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WGGE4336A090MAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for WGGE4336A090MAB — 0130F00010S

Name: OEM Goodman Flame Sensor for WGGE4336A090MAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-14664
Price: 39.95 USD
Availability: InStock

SKU: GOODMAN-14664 Brand: Goodman

$39.95 $52.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for WGGE4336A090MAB gas furnaces. Positioned in the burner flame, the sensor uses microamp flame-rectification to confirm to the ignition control board that a flame is actually present. If it fails to detect flame, the control shuts off the gas valve as a safety measure.

A dirty, oxidized, or worn flame sensor is one of the single most common causes of a furnace that lights and then shuts off after a few seconds (short cycling on flame failure). While light oxidation can sometimes be cleaned, a cracked ceramic insulator, pitted rod, or repeated failures call for a fresh OEM sensor to restore dependable heating.

Part number: 0130F00010S
Function: Flame-rectification sensing rod
Brand: Goodman / Amana OEM
Fits: WGGE4336A090MAB and compatible furnaces
Signal: Microamp DC flame-current feedback
Construction: Kanthal rod with ceramic insulator and OEM bracket

OEM vs. Generic

Rod length, bend angle, and bracket geometry position the tip in the correct part of the flame — a generic sensor that sits too high or low reads a weak, unstable flame signal. This OEM Goodman 0130F00010S is dimensioned for the exact burner and flame path of the WGGE4336A090MAB, delivering a strong, stable microamp signal on the first try.

Installation Difficulty: Easy

Shut off power and gas, remove the single mounting screw and spade connector, install the new sensor, and restore power. Verify a steady flame signal and normal ignition sequence after installation; have a licensed HVAC technician confirm proper operation.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for WGG...

$39.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman WGGE4336A090MAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman WGGE4336A090MAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman WGGE4336A090MAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu