What are the specs for this Flame Sensor?

The correct replacement for Goodman model WGGE4336A045MAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WGGE4336A045MAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for WGGE4336A045MAB — 0130F00010S

Name: OEM Goodman Flame Sensor for WGGE4336A045MAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-14645
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-14645 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement designed for the WGGE4336A045MAB gas furnace and compatible Goodman/Amana models. The flame sensor (also called a flame rod or flame-rectification probe) confirms to the control board that a flame is present after ignition. When it fails, the furnace typically lights, runs for a few seconds, then shuts down and locks out — a classic "short-cycle on ignition" symptom caused by a dirty or degraded sensor.

Specifications

Part Number: 0130F00010S (OEM Goodman)
Type: Single-rod flame sensor / flame-rectification probe
Fits Model: WGGE4336A045MAB and compatible Goodman gas furnaces
Material: High-temperature stainless steel rod with ceramic insulator
Connection: Quarter-inch (1/4") male spade terminal

OEM vs. Generic

Our OEM option is the exact factory part, guaranteeing correct rod length, insulator rating, and terminal placement for consistent microamp signal. A Generic universal sensor costs less and fits many furnaces, but may require bracket adjustment and can produce a weaker flame-sense signal on some control boards. For a trouble-free, drop-in repair we recommend OEM.

Installation Difficulty: Easy (1/5)

Shut off power and gas, remove one mounting screw, unplug the spade terminal, and swap the sensor. Most homeowners complete this in under 15 minutes. Tip: if you are already inside the burner compartment, lightly cleaning the surrounding area helps prevent future flame-sense faults. Always confirm compatibility with your furnace's data plate before installing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for WGG...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman WGGE4336A045MAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman WGGE4336A045MAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman WGGE4336A045MAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu