What are the specs for this Flame Sensor?

The correct replacement for Goodman model WGGE4330A045MAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WGGE4330A045MAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for WGGE4330A045MAB — 0130F00010S

Name: OEM Goodman Flame Sensor for WGGE4330A045MAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-14626
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-14626 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor (flame rod) built for the WGGE4330A045MAB gas furnace. The flame sensor confirms to the control board that the burners have actually lit; when its microamp signal drops — usually from oxide buildup on the rod — the board closes the gas valve as a safety measure. The classic symptom is a furnace that ignites, runs a few seconds, then shuts off and retries (short-cycling), often ending in a lockout and no heat.

Specifications

OEM Part Number: 0130F00010S
Type: Single-rod flame sensor / flame rectification probe
Fits: Goodman WGGE4330A045MAB furnace
Construction: High-temperature Kanthal rod with ceramic insulator
Mount: Bracket-mounted at the burner assembly

OEM vs. Generic

The OEM sensor uses the correct rod length, insulator, and terminal spacing so it seats at the proper depth in the flame envelope — critical for a stable microamp reading. Generic rods may sit too shallow or deep, causing intermittent faults even when clean. The factory part restores a reliable signal the first time.

Installation Difficulty

Easy (2 of 5). Shut off power and gas, remove one mounting screw, unplug the spade connector, and install the replacement. Takes about 15–20 minutes. Tip: replace rather than just sanding a worn rod for a longer-lasting fix.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for WGG...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman WGGE4330A045MAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman WGGE4330A045MAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman WGGE4330A045MAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu