What are the specs for this Flame Sensor?

The correct replacement for Goodman model WGFM195090S5CAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WGFM195090S5CAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for WGFM195090S5CAA — 0130F00010S

Name: OEM Goodman Flame Sensor for WGFM195090S5CAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-14383
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-14383 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the WGFM195090S5CAA 95% AFUE gas furnace and compatible Goodman/Amana models. The flame sensor confirms the burners have lit; when it degrades or oxidizes, the control board can't verify flame and shuts the gas valve — causing short-cycling or repeated ignition lockouts.

Specifications

OEM Part Number: 0130F00010S
Component: Flame sensor / flame rectification rod
Fits: Goodman WGFM195090S5CAA and compatible high-efficiency furnaces
Function: Verifies burner flame presence for the ignition control
Construction: High-temperature sensing rod with OEM mounting bracket

OEM vs. Generic

The genuine OEM 0130F00010S arrives with the correct rod length, bend, and mounting position so it sits precisely in the burner flame — critical for a stable microamp signal. Generic rods that sit too high or low give weak or intermittent readings and nuisance lockouts. OEM fit ensures reliable flame sensing every cycle.

Installation Difficulty

Easy (1 of 5). Cut power to the furnace, remove the single mounting screw, unplug the sensor lead, and install the replacement. Avoid touching the rod with bare fingers. Restart and confirm steady burner operation without lockout. A licensed HVAC tech can verify the flame-sense microamp reading if needed.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for WGF...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman WGFM195090S5CAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman WGFM195090S5CAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman WGFM195090S5CAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu