What are the specs for this Flame Sensor?

The correct replacement for Goodman model WGFD293090V5DAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WGFD293090V5DAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for WGFD293090V5DAB — 0130F00010S

Name: OEM Goodman Flame Sensor for WGFD293090V5DAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-14249
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-14249 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Genuine Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a factory OEM flame sensor (flame rod) built for the WGFD293090V5DAB gas furnace and compatible Goodman/Amana models. After the burners light, this sensor uses flame rectification to confirm a stable flame is present and signals the control board to keep the gas valve open. When the sensor is dirty, corroded, or failing, the board can't verify the flame and shuts the burners down — causing short-cycling, intermittent no-heat, or a furnace that lights then quits after a few seconds.

This OEM flame rod provides the correct rod length, ceramic insulator, and micro-amp signal characteristics your furnace requires for dependable flame proving.

Specifications

OEM Part Number: 0130F00010S
Brand: Goodman (also fits Amana)
Component: Flame sensor / flame rectification rod
Equipment Type: Gas furnace
Primary Fit: WGFD293090V5DAB
Function: Confirms burner flame, controls gas-valve safety

OEM vs. Generic

Generic flame rods often have a slightly different rod length or insulator height, positioning the tip incorrectly in the flame and producing a weak micro-amp signal that still triggers lockouts. The genuine Goodman 0130F00010S seats exactly where the burner assembly expects it, delivering a strong, stable flame signal and a lasting fix.

Installation Difficulty

Easy (1 of 5). Shut off power and gas, remove the burner door, unplug the single sensor wire, and remove one mounting screw. Install the new sensor, reconnect, and reassemble. Handle by the ceramic base only — never the metal rod. About 10–15 minutes.

Genuine OEM reliability. In stock and ready to ship.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for WGF...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman WGFD293090V5DAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman WGFD293090V5DAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman WGFD293090V5DAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu