What are the specs for this Flame Sensor?

The correct replacement for Goodman model WGFD293070V4CAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WGFD293070V4CAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for WGFD293070V4CAA — 0130F00010S

Name: OEM Goodman Flame Sensor for WGFD293070V4CAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-14220
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-14220 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement engineered for the WGFD293070V4CAA gas furnace and compatible Goodman/Amana models. This sensing rod confirms that the burner flame is present after ignition; when the rod's oxide coating builds up or the tip fails, the control board loses its flame signal and locks the furnace out — the classic "lights then shuts off after a few seconds" short-cycle. Installing the correct OEM sensor restores reliable flame proving and safe, continuous operation.

OEM Part Number: 0130F00010S
Function: Flame rectification / flame proving rod
Equipment: Goodman gas furnace
Fits Model: WGFD293070V4CAA
Connection: Single spade terminal with mounting bracket
Material: Stainless-steel sensing rod, ceramic insulator

OEM vs. Generic

This is the genuine Goodman OEM sensor, guaranteeing exact rod length, bend geometry, and insulator fit so the flame signal microamp reading stays within spec. Generic universal sensors often require re-bending and can produce weak or erratic signals that trip intermittent lockouts. For a critical safety component like flame proving, OEM is the recommended choice.

Installation Difficulty

Easy (1/5). A single screw and one wire disconnect. Shut off power and gas, remove the burner-compartment screw, unplug the spade terminal, swap the sensor, and reconnect. Lightly cleaning the new rod is unnecessary. Most homeowners complete this in under 15 minutes; no special tools required beyond a nut driver.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for WGF...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman WGFD293070V4CAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman WGFD293070V4CAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman WGFD293070V4CAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu