What are the specs for this Flame Sensor?

The correct replacement for Goodman model WFM18140S5DNCB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WFM18140S5DNCB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for WFM18140S5DNCB — 0130F00010S

Name: OEM Goodman Flame Sensor for WFM18140S5DNCB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-14159
Price: 44.95 USD
Availability: InStock

SKU: GOODMAN-14159 Brand: Goodman

$44.95 $59.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The genuine OEM 0130F00010S flame sensor confirms the presence of a burner flame in your Goodman WFM18140S5DNCB furnace. Using flame rectification, the sensor rod passes a tiny microamp current through the flame back to the control board; if no flame is detected within the trial-for-ignition window, the board shuts off gas for safety. A dirty, cracked, or worn flame sensor is one of the most common causes of furnace short-cycling and ignition lockout.

Specifications

Function: Flame rectification sensor rod
Signal: Microamp flame current to ignition control
OEM Part Number: 0130F00010S
Fits: Goodman WFM18140S5DNCB and compatible furnaces
Single-rod design with mounting bracket and spade terminal

OEM vs. Generic

Flame sensor rod length, ceramic insulator quality, and positioning determine how consistent the flame-current signal is. The OEM Goodman sensor is built to the exact factory geometry for a stable microamp reading. Lower-cost generics can produce a weak or erratic signal that leads to intermittent lockouts. Given how often this small part is the root-cause fix, OEM reliability pays off.

Installation Difficulty

Easy (2/5). Turn off power, remove the single mounting screw, unplug the sensor wire, and install the replacement. Avoid touching the rod with bare fingers. Roughly a 10-minute repair — one of the simplest and most rewarding furnace fixes.

Tip: cleaning a lightly fouled sensor with fine abrasive pad can restore function, but a pitted or cracked rod should be replaced. Help: info@nationalhvacparts.com.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for WFM...

$44.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman WFM18140S5DNCB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman WFM18140S5DNCB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman WFM18140S5DNCB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu